Shinji Nakako

Stingy Jack, An Anatomy: An Afterword by Brandt Peters

  • by

After years of designing characters and toys brands for Slap-Happy!,The Serv-O-Matics, Dead Bunny, The Carnies, Big Sal, and other odds and ends with almost every toy company out there, I went back to the drawing board to really consider what I was trying to accomplish and say with my characters. The public only gets to see the final result in the stores or online, but each of the above projects were months and years of my time developing and it takes a lot out of me. In order to stoke and keep the creative fire going strong, I had to reach even deeper and closer to mine and my creations’ raison d’etre.

Following a month or so of scribbling, note taking, researching, talking to my colleagues and friends, reading the industry – I reached in and figured exactly what my inspirations are, who I am and precisely what I want to leave, as far as a mark on the planet and this toy world. Stingy Jack is the first project (of many in development) that hits closest to home. I guess as a growing artist, my tastes change, I get more honest with myself, I hone in closer and closer to what makes me tick and Vintage Halloween has always thrilled me… just as much as all of my other toy subject matter: Ancient Aliens (Big Sal), Coney Island and Depression era ephemera (most of my toy designs to date).

Read More »Stingy Jack, An Anatomy: An Afterword by Brandt Peters

T+CP: Brandt Peters’ Stingy Jack Sofubi Reviewed on Kaiju Korner!

  • by

Brandt Peters’ Stingy Jack recently received a cracking review from premier Japanese toy culture site, Kaiju Korner! In-depth, charming and deeply insightful, blogger Andy B wholly captured the essence and charm of the figure and the intent of the T+CP initiative. Now sold out at Circus Posterus and Tomenosuke, the response for Stingy from collectors worldwide has been incredible. Click here to find out why!

Stingy Jack: An Anatomy, Pt. 5

  • by

 Previously on Stingy Jack, An Anatomy 4: We get our first look at Stingy in coloured vinyl and apply new paint mods to help show off his assets. And then, the unthinkable: the unforgiving heat of New Mexico warps Stingy’s feet, causing him to shelf dive. So, we rebuild: his feet are remodeled and repositioned for better stability. He’s tested and stands. And now: the exciting conclusion!

After a year of planning and production, 120 Stingy Jacks arrive on Tomenosuke’s doorstep from Obitsu. Half will head to New Mexico for the North American release, while the remainder will stay back for international collectors. An overwhelming feeling of relief and pride spills over Tomenosuke store owner and T+CP partner, Shinji Nakako.

“Since it took a full year to complete, I think that’s all the more strong feelings towards this piece,” Shinji reflects on the experience.

“I assumed that I had acquired plenty of experience in toy making from the resin figure Lady Butterfly and the high-end prop replica Tomenosuke Blaster, but what awaited me were the challenges and excitements unique to vinyl.

“The task at hand was to create a model for mass production without sacrificing the nuance of the original sculpture, while clearing certain limitations involved with forming from metal mold,” Shinji continues. “I thought that I knew fully well of the material’s characteristic of being sensitive to heat, but due to the high temperatures in the summer, the base of the figure’s feet had deformed and could not support itself. As a result, We had to make the feet from scratch.

It’s only sofubi, but it’s still sofubi… not something that could be done in a brief period of time.”

Up next: Brandt Peters sits down and, in a rare afterword, explains Stingy’s creation, his passion for sofubi and what’s next for Tomenosuke + Circus Posterus.

[via the Tomeno blog]

Brandt Peters’ Sofubi Stingy Jack Dropping This Weekend!

The wait is finally over! Tomenosuke-syoten and Circus Posterus are excited to announce that production on Brandt Peters’ sofubi Stingy Jack is complete and will be releasing this weekend!

A run of 120 pieces, the edition will be halved between Circus Posterus and Tomenosuke-syoten (so 60 per store). They retail for $95 each (7,600 yen) and stand around 6 inches. Each comes poly-bagged with a header card signed by Mr. Brandt Peters himself.

CP will handle North American collectors only (MUST be shipped to a North American destination). The figures will be available through Stranger Factory on Sunday, Aug. 26th at 1pm PST. The release will be treated just like a gallery request, so email strangerfactorysales@gmail.com at exactly 1pm on Aug. 26th for your chance to purchase.

*** Buyers will be notified and if payment is not received by the cut-off date, the remaining Stingy Jacks will be put up on CP.com ***

Tomenosuke-syoten will handle all other international collectors (North American orders will be denied). The figures will drop at midnight Japan time on Aug. 25th (early Sunday morning) via the Tomenosuke + CP sales page.
The figures are one per household. Both retailers reserve the right to deny requests from known resellers and flippers.

Good luck!

Stingy Jack: An Anatomy, Part 4

  • by

 Previously on Stingy Jack, An Anatomy III: The flashing is cut, the tests are assembled and the Pantones are picked. Now: troubleshooting, colour-castin’ and package graphics!

After the test-pulls were sent to New Mexico and green-lit by Brandt, Stingy Jack took another spin through Obitsu, this time for colour-casting. What you see above is not paint application — but actual coloured vinyl which is then painted. Scroll a bit and you’ll see what I mean:

This is one of the first paint tests. Two paint masks were developed for the eyes and collar, along with applications to Stingy’s hat and hands. After this first pass it was determined that another mask would be added to Stingy’s right hand as the cigar looks like a finger. The pom-poms on his belly would also be painted for added emphasis.

Read More »Stingy Jack: An Anatomy, Part 4

Stingy Jack: An Anatomy, Part III

Previously on Stingy Jack, An Anatomy II: Stingy Jack sees double after he’s made into a wax model! Five metal molds are created and the folks at Obitsu start casting Stingy’s individual parts. Now: we return to the factory and watch as Stingy’s clone army comes to life one by one.

After all of Stingy’s parts have been poured, spun and popped, the sculptors at Obitsu are left with dozens of lone limbs that need to be reassembled. But before doing that, the flashing needs to be cut off — these are the cone-like scraps you see on the left side of the picture below. The flashing makes it easier to extract the vinyl from the mold, so it can be discarded after the figure is pulled. That’s when the fun of reanimation begins …

Read More »Stingy Jack: An Anatomy, Part III

Stingy Jack: An Anatomy, Part II

Previously on Stingy Jack, An Anatomy: Brandt Peters and Tomenosuke-syoten’s Shinji Nakako join forces and found an ambitious new designer toy project: Circus Posterus x Tomenosuke sofubi. This particular blog series follows the production of Brandt’s Stingy Jack, the first of an entire line of sofubi figures from different Circus artists. Part I saw Stingy go from resin prototype to mods to re-sculpting for sofubi format. Now: we head to Obitsu, a long-established Japanese plastics manufacturer, where Stingy prepares to be cloned. ***

Following Stingy’s sofubi facelift, the master sculpt is taken to Obitsu to determine how many molds it will require. With all of his accessories and details, Stingy is considered a fairly complex sculpt by sofubi standards, with seven separate parts (hat, head, torso, two hands, two feet). It’s determined that he’ll require a total of five molds, as illustrated by the colour-coding in the image above.

For molding purposes, the master sculpt is re-cast in wax, which is then used to create the metal molds.

And heeeeeeeere’s Stingy! I mean, can you get more metal?! With these molds, Obitsu casts the first test-pulls. As you can see, the body parts are made slightly longer than necessary to account for the flashing (i.e. cone-like ‘leftovers’ which make it easier to pull the pieces out of the mold).

Now, let us all hold hands and watch Stingy be birthed. It’s actually quite an interesting process:

1) The vinyl is poured into the mold.

2) The mold is then put into a large drum where it’s spun (the number of times a figure is spun is in direct correlation with the thickness of the vinyl).

3) The mold is then briefly dropped into a chemical bath, drained and cooled.

4) The sculpt is then plucked from the mold and set aside.

5) This is repeated with every part of the figure.

Up next: we cut some flash, assemble some Stingies and start planning the figure’s first colorway! (My kind of party!)

[via the Tomeno blog]

Stingy Jack: An Anatomy, Part I

Shortly after production began on Brandt Peters’ Stingy Jack sofubi, Shinji Nakako of Tomenosuke-syoten has been diligently chronicling the figure’s production process from start to finish. The idea of CP sofubi was first sparked last year and since then, we’ve all eagerly watched this jester-like Jack-o’-lantern come to life, one sketch, WIP shot and prototype at a time.

But now, for the first time, experience the process from a completely behind-the-scenes perspective; the digital models, the revisions, the wax models and pantones … a glimpse at just how much goes into creating the toys we covet.

This is the first instalment of Shinji’s ‘Making of Sofubi Stingy’ series, with many more to come. Enjoy!

Read More »Stingy Jack: An Anatomy, Part I

Brandt Peters x FERG No. 7 [Drifter] Shipping End of May

  • by

The second flyer for Brandt Peters x FERG’s next Trouble Boy has been revealed which can only mean one thing: a release date! Tomenosuke’s toy wrangler, Shinji Nakako, has just announced that production on No. 7 [DRIFTER] is wrapping up around May 25th and will be shipping to Japan immediately after. So we’re looking at a mid-June exit.

… Be still, my trigger finger.

More details to come closer to the release date. In the meantime, enjoy the BP sketch that started it all, and a lovely snap of the sweet, cold hardware that No. 7 will be packing (the suppressor is removable!). Pew pew, mthrfckr!!!

Misfits Touch Down in Japan and M&MII Preview Info!

  • by

Mr. Shinji Nakako over at Tomenosuke-syoten received a most wondrous box of sculptural beauty from Brandt and Kathie a few days ago. Looks like everything arrived safely, which is a relief (though not a surprise: KO = Uline Queen). Feel free to scroll, stare, lick the screen, etc. I’ll wait.

… OK, the next important thing is the highly anticipated preview info, direct from the Tomenosuke blog:

Local collectors attending the exhibition on April 13th get first crack. Afterwards, all remaining pieces will be available online at midnight on April 14th, Japan time. North Americans, this will be the Saturday morning for you — queue up that time zone calculator! More info will be released as we near the date!

Monsters & Misfits II opens April 13th at the Kusakabe Folk Museum in Takayama, Japan.